The Standard for Professional Output: 3-Pin XLR Male Connector 🎙️

Reliability meets high-fidelity with our Standard 3-Pin XLR Male Connector. This is the industry-standard plug for the "mixer end" of your microphone cables and balanced patch leads. Whether you are a studio engineer building custom cables or a technician repairing gear for a live tour, this connector provides the durability and signal purity you need to keep the show running. ✨

Where to Use It:

• ✅ Mixer & Interface Inputs: The standard plug used to connect your mics to mixing consoles and audio interfaces. 🎚️

• ✅ Patch Cables: Build custom-length cables to interconnect outboard gear, compressors, and rack effects.

• ✅ PA Systems: Connect balanced line-level signals to amplifiers, crossovers, and active subwoofers. 🔊

• ✅ DMX Signal Chains: Reliable for 3-pin DMX data transmission in professional lighting rigs. 💡

Key Features:

• 🔌 Rugged Zinc Alloy Shell: Die-cast metal housing provides superior protection against physical impact and electromagnetic interference (EMI). 🛡️

• 🔇 Balanced Audio Architecture: 3-Pin layout (Pin 1: Ground, Pin 2: Hot, Pin 3: Cold) for maximum noise rejection over long cable runs.

• 🔗 High-Grip Internal Strain Relief: Features a chuck-type internal clamp that grips the cable jacket tightly to protect solder joints from being pulled or stressed.

• 📏 Tapered Rubber Boot: The flexible boot prevents sharp bends at the connector exit, significantly extending the life of your cable.

Why Choose Our XLR Male Plug?

• 💎 Silver-Plated Contacts: Offers the highest electrical conductivity and resists corrosion for years of reliable signal transmission. 🏅

• 🎶 Easy DIY Soldering: Features large, accessible solder buckets that make assembly fast and clean, even for beginners. 🛠️

• 🏅 Universal Compatibility: Precision-milled to international standards to fit perfectly into any 3-pin female XLR socket or panel mount.

Technical Specs:

• 🏷️ Type: XLR Male (Plug)

• ⚡ Termination: Solder-on Buckets

• 🌀 Color: BLACK / RED / YELLOW / GREEN / BLUE

Top 3 Customer Questions & Concerns 🙋‍♂️

1. 🔊 Is this the end that goes into the mixer?

   • Yes. In a standard audio setup, the Male end plugs into your Mixer, Audio Interface, or Wall Box, while the Female end plugs into the microphone.

2. 🔥 Will the pins stay in place during soldering?

   • Absolutely. We use high-grade, heat-resistant internal insulators to ensure the pins stay perfectly aligned even when applying heat with a soldering iron.

3. 🔌 Can I use this for speaker cables?

   • It is intended for balanced line-level signals (like mics or mixer outputs). For high-power unpowered speakers, we recommend using dedicated Speakon connectors.