The Gold Standard for Microphone Cables: 3-Pin XLR Female Connector 🎙️

Complete your audio signal chain with our professional 3-Pin XLR Female Connector. Designed to be the "input" side of your balanced audio cables, this connector provides a rock-solid link for microphones, mixers, and studio gear. With its precision-engineered locking mechanism, you can perform with confidence knowing your connection is secure. ✨

Where to Use It:

• ✅ Microphone Cables: The standard socket end that plugs directly into the base of professional microphones. 🎤

• ✅ Balanced Patch Cables: Ideal for connecting outboard studio gear like compressors and EQs.

• ✅ Powered Monitors: Connect balanced line-level signals to your studio or PA speakers. 🔊

• ✅ DMX Lighting: Suitable for 3-pin DMX data cables used in stage lighting setups. 💡

Key Features:

• 🔌 Secure Push-Lock Latch: Features a high-tension metal button that "locks" the connection to prevent accidental unplugging.

• 🔇 Balanced Audio Integrity: Standard 3-pin configuration (Ground, Hot, Cold) for maximum noise and hum rejection. 🛡️

• 🔗 Rugged Zinc Alloy Shell: Die-cast metal housing protects internal solder joints from impact and crushing.

• 📏 Tapered Strain Relief: The flexible rubber boot prevents the cable from kinking or fraying at the connection point.

Why Choose Our XLR Female Connector?

• 💎 Reliable Signal Transfer: Silver-plated copper contacts ensure low resistance and high-fidelity audio. 🏅

• 🎶 Professional Durability: Built to withstand the rigors of touring, rehearsals, and daily studio use.

• 🏅 Easy DIY Assembly: Large, hollow solder buckets make it simple for beginners and pros alike to wire. 🛠️

Technical Specs:

• 🏷️ Type: XLR Female (Socket)

• ⚡ Termination: Solder-on

• 🌀 Compatibility: Fits standard pro-audio cables

Top 3 Customer Questions & Concerns 🙋‍♂️

1. 🔊 Is this the end that goes into the microphone?

   • Yes. In standard audio setups, the Female end plugs into the Microphone, and the Male end plugs into your Mixer or Audio Interface.

2. 🔥 Is the internal insulator heat-resistant?

   • Yes. Our connectors use high-grade insulators that won't melt or allow pins to drift while you are soldering your wires.

3. 🔌 Do I need any special tools?

   • Just a standard soldering iron and solder wire. The internal parts are easy to access by simply unscrewing the back shell.